Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 kHz to 3 GHz

Rohde & Schwarz, Inc. FSH6 Handheld spectrum analyzer 100 kHz - 6 GHz, RBW 100 Hz -1 MHz, LCD color display, preamplifier (P/N 1145.5850.06) The Rohde & Schwarz, Inc. FSH6 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSH6. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Rohde & Schwarz, Inc. FSH6 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz, Inc. FSH6 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz, Inc. FSH6 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

• Frequency range 100 kHz to 6 GHz
• Internal preamplifier with frequency range from 100 kHz to 6 GHz
• Displayed average noise level typ. -135 dBm (RBW 100 Hz)
• 0.5 dB typ. level accuracy up to 6 GHz
• Resolution bandwidths 100 Hz to 1 MHz, 1 and 3 steps
• Wide range of detectors: sample, max/min peak, auto peak, RMS